He-Man and the Masters of the Universe take on Skeletor and the Evil Warriors. With ten detailed miniatures surrounded by over 35 terrain pieces, you'll battle for the power of Grayskull. You'll need properly sorted game material and decent protection to ensure that your fighters' abilities are on full display and that the models don't end up in the hospital before the battle due to missing limbs.

With this Feldherr Organizer Set, you get a tidy core game box and protection for your miniatures. High-quality foam inserts ensure that your miniatures are always battle-ready and reliably protected. And plastic token and card holders take care of the game material from the Starter Set. And because Feldherr is a master of their trade, the miniatures and game material of the two Wave 1 expansions, "Evil Warrior Faction" and "Masters of the Universe Faction," also fit into the set.

The Organizer-Set fits into the original Masters of the Universe: Battleground core game box.
Offers space for the 10 miniatures, 40 terrain pieces, and the entire game material of the core game.
Models, terrain pieces, and game material from the two Wave 1 expansions, "Evil Warrior Faction" and "Masters of the Universe Faction," also fit into the Organizer.
Four foam inserts protect the miniatures and terrain pieces. You store the inserts in the lower part of the box.
The plastic Organizer fills the top of the box. It helps you to store and sort the game cards and small-sized game material like tokens.
Of course the cards also fit with protective sleeves into the card compartments (max. external dimensions: standard cards 68 x 92 mm, small-format cards 46 x 71 mm).
Larger game components - the Battleground, Rulebook, Battleground Book, and Rulers - are placed on the Organizer.
To prevent the Battleground from slipping inside the box and simplify the withdrawal of the game board, a plastic placeholder is included.
Transportable and tilt-proof - vertical storage possible.
The lid of the box protrudes about 2 cm.
The Flex Cross Band size XL, which is also included in the set, ensures more stability during storage and transport.
Ready to use - no assembly required
While you and your friends fight for Castle Grayskull, we fight to protect your miniatures and keep your board game box in order.

The four Feldherr foam trays provide each miniature and terrain piece with its own compartment. From He-Man to Skeletor to the contents of the expansions, all heroes, enemies, and terrain pieces get a custom-fit compartment.

The custom-fit cut ensures a tight fit, so nothing slips during transport. The filigree details of the miniatures are reliably protected from damage. If you have painted your models, you can be sure that the colors are still intact after transport.

Use empty compartments in the foam trays to store your dice.

Two token holders with six compartments each provide space to arrange your tokens meaningfully. You'll also stow the two flat platform terrain pieces in the largest compartment of each token holder.

After models and game materials are properly sorted, stow the foam inserts in the lower part of the box while the plastic inserts of the Organizer sit on top.

The set consists of:

2 foam trays, each with 16 compartments for terrain pieces and dice
1 foam tray with 16 compartments for miniatures + terrain pieces
1 foam tray with twelve compartments for terrain pieces
2 plastic token holders, each with six compartments for terrain pieces like platforms + small-sized game materials like tokens
2 plastic card holders, each with three compartments for small-format cards like Item Cards
6 plastic card holders, each with a compartment for standard cards like Character, Weapon, Fate, and Glory Cards
1 plastic placeholder
1 Flex Cross Band blue (size XL)
2 foam topper

high-quality, fine pored foam
chlorine and acid-free
Made in Germany
As with all 3D-printed models, minor imperfections may occur. The product images are only examples of how the finished product may look. Colors may vary. All products are delivered unpainted.

Welcome to Castle Ravenloft. The lord of the castle invites you to dinner and you are on the guest list - probably also on the menu. Because Count Strahd is thirsting for fresh blood and the monsters hiding behind the castle walls are no less hungry. Only if you and your fellow companions stick together will you survive the adventures that await you.

To keep all your tokens, markers and cards together and to make sure nobody loses their head early, here is the Feldherr foam set for your "Dungeons & Dragons: Castle Ravenloft" board game box.

- The set fits exactly into the original game box for "Dungeons & Dragons: Castle Ravenloft Board Game" by Wizards of the Coast.
- Provides space for all 42 miniatures and the entire game material.
- The lid of the board game box protrudes approx. 6-7 cm.

The set includes:

- 2 foam trays for miniatures (DKMEPU065BO)
- 1 foam tray for large miniatures and cards (DKMEPT085BO)
- 1 foam tray for tokens and markers (DKMEPV045BO)
- 1 foam topper

The foam trays are half as wide as the game box. Therefore, two are placed next to each other inside the box.

On one side are the two foam inserts for the majority of the miniatures. Every hero, every monster and every single villain is assigned his own compartment.

From Flesh Golem to Blazing Skeletons to Kobold Skirmisher - every figure is securely wrapped in foam. Precisely fitting compartments ensure that the miniatures remain safely in place even when on the move. Thus not only the fine parts are protected from damages, also the colors of painted figures are safe from abrasion and scratches.

On the other two inserts next to it you place the large miniatures and the accessories. A big compartment houses the Dracolich Gravestorm, three smaller ones the Gargoyles.

Two compartments are reserved for the cards. These card slots are also suitable for cards with sleeves.

The fourth tray helps you sort the tokens and markers. You can sort them easily and clearly here. This saves time and nerves when building the game and no Hit Point token gets lost. Of course, the dice also gets its own compartment.

With the supplied foam topper you cover the mats so that everything is securely wrapped in foam and nothing falls out of the inserts during transport. The larger cardboard parts - the Hero and Villain cards, the Dungeon tiles and the booklets - are placed on the topper.

With it, all miniatures are safely packed, the game material neatly stowed away and the contents of your box optimally prepared for transport.

The foam trays have the following dimensions:

- DKMEPU065BO: 300 mm x 150 mm x 65 mm total height (55 mm usable height + 10 mm foam base)
- DKMEPT085BO: 300 mm x 150 mm x 85 mm total height (75 mm usable height + 10 mm foam base)
- DKMEPV045BO: 300 mm x 150 mm x 45 mm total height (35 mm usable height + 10 mm foam base)

- high-quality, fine pored foam
- CFC-free
- chlorine and acid-free
- Made in Germany

Mercenaries, assassins, shadow dragons, gods, and demons. The list of those with a desire to kill you is very long. But what would a legendary adventurerer be without challenges to overcome?

It's not just in the depths of the Underdark or the icy plains of Ice Wind Dale that hefty challenges await you. Just getting the 40 miniatures undamaged from one place to another is sometimes an undertaking worthy of a hero's song. We can't sing you a song, but with the Feldherr foam set, we can help you get your figures unharmed from A to B and neatly store your game material. That way, everything is safely packed and neatly organized.

- The foam set fits into the original board game box of the Dungeons & Dragons: The Legend of Drizzt core game.
- 5 foam inserts provide space for the 40 plastic miniatures, 200 cards, 70 tiles, and the game materials from the core game.
- The regular-sized cards also fit with protective sleeves.
- Adventure Book and Rulebook are stored separately on the foam topper in the box.
- The lid of the board game box protrudes about 8 cm.
- For more stability during storage and transport, the Flex Cross Band size L is also included in the set.
- transportable and tilt-proof - vertical storage possible

To safely store your fantastic miniatures, we've packed 3 foam inserts with custom-fit compartments into the box. Whether hero or monster, Drizzt or Errtu, we take care of each of your 40 miniatures. Each model gets its own compartment. Thanks to the custom-fit cut, the figures have a tight fit. Nothing can slip and bump against each other, even when transported through the Underdark. The soft, fine-pored foam protects delicate parts from breaking off, and the colors of your painted models are safe from ugly scratches and chipping paint.

After your miniatures are properly stored, we turn our attention to your game material. You can store your game cards next to Errtu. In the insert are two compartments in which your regular-sized game cards easily fit. Of course, they also fit with protective sleeves.

Hero tiles, Villain tiles, and the tiles to create the game map receive an insert with three compartments.

Sort the 200 tokens and markers and the die, into the insert with the 16 compartments and into the remaining compartments of the other inserts.

The included foam toppers complete the set. This way, the miniatures are securely packed all around and during transport, nothing bumps against the lid of the box.

The Adventure Book and the Rulebook are placed separately on the foam topper inside the box.

Hereby, all miniatures are safely packed, the game material is neatly stowed away, and you are well-prepared for the next adventures.

The lid of the board game box protrudes significantly. To ensure a stable, transportable fit of the lid, the set also contains a Feldherr Flex Cross Band green (size L).

The foam inserts have the dimensions:

- DKMFFA095BO: 300 mm x 150 mm x 95 mm total height (85 mm usable height + 10 mm foam base)
- DKMEPU065BO: 300 mm x 150 mm x 65 mm total height (55 mm usable height + 10 mm foam base)
- DKMEPV045BO: 300 mm x 150 mm x 45 mm total height (35 mm usable height + 10 mm foam base)
- ABMESX045BO: 300 mm x 300 mm x 45 mm total height (35 mm usable height + 10 mm foam base)

- high-quality, fine pored foam - Made in Germany
- chlorine and acid-free

The last remaining humans, dwarves and elves, who settle at the foot of Firestorm Peak, already have it hard enough. They must defend themselves against the marauding gangs of orcs and goblins, and against even greater horrors lurking in the shadows. To make matters worse, a new villain has made the volcano his new lair: the red dragon Ashardalon ...

To make sure you don't have to worry about bent weapons or missing healing surge tokens - thus you can concentrate on your heroes and their upcoming adventures - here's the Feldherr foam set for your "Wrath of Ashardalon" board game box.

- The set fits exactly into the original game box for "Dungeons & Dragons: Wrath of Ashardalon Board Game" by Wizards of the Coast.
- Provides space for all 42 miniatures and the entire game material.
- The lid of the board game box protrudes approx. 6-7 cm.

The set includes:

- 2 foam trays for miniatures (DKMEPU065BO)
- 1 foam tray for large miniatures and cards (DKMEPT085BO)
- 1 foam tray for tokens and markers (DKMEPV045BO)
- 1 foam topper

The foam trays are half as wide as the game box. Therefore, two are placed next to each other inside the box.

On one side are the two foam inserts for the majority of the miniatures. Every hero, every monster and every single villain is assigned his own compartment.

From Otyugh to the Cave Bears to Kobold Dragonshield - every figure is securely wrapped in foam. Precisely fitting compartments ensure that the miniatures remain safely in place even when on the move. Thus not only the fine parts are protected from damages, also the colors of painted figures are safe from abrasion and scratches.

On the other two inserts next to it you place the large miniatures and the accessories. A big compartment houses the Red Dragon Ashardalon, three smaller ones the Grells.

Two compartments are reserved for the cards. These card slots are also suitable for cards with sleeves.

The fourth tray helps you sort the tokens and markers. You can sort them easily and clearly here. This saves time and nerves when building the game and no Hit Point token gets lost. Of course, the dice also gets its own compartment.

With the supplied foam topper you cover the mats so that everything is securely wrapped in foam and nothing falls out of the inserts during transport. The larger cardboard parts - the Hero and Villain cards, the Dungeon tiles and the booklets - are placed on the topper.

With it, all miniatures are safely packed, the game material neatly stowed away and the contents of your box optimally prepared for transport.

The foam trays have the following dimensions:

- DKMEPU065BO: 300 mm x 150 mm x 65 mm total height (55 mm usable height + 10 mm foam base)
- DKMEPT085BO: 300 mm x 150 mm x 85 mm total height (75 mm usable height + 10 mm foam base)
- DKMEPV045BO: 300 mm x 150 mm x 45 mm total height (35 mm usable height + 10 mm foam base)

- high-quality, fine pored foam
- CFC-free
- chlorine and acid-free
- Made in Germany

The popular board game Gloomhaven comes with hundreds of small parts – time to get organized with our foam set for Gloomhaven so you don't run into the danger of losing any vital components.

- The set is compatible with the first, second, third and fourth edition.
- Three custom inserts allow you to clearly organize and safely store your game components. One insert is reserved for cards, Sheets, Sealed Envelopes and HP/XD-Dials. Two inserts will hold all the Tokens, Discs, Standees and Plastic Stands.
- The set is meant to be stored next to the Character Tuck Boxes inside the original game box. Organized thus, all components will fit like a glove.
- Includes a matching foam topper. The topper is laid on top of the inserts to ensure that all components stay in place - at all times.

The larger game components like the rule book, the scenario book and the map boards are placed on top of the set.

The Set contains:

- 1 foam insert with 12 compartments for Sheets and cards (CEMEGY080BO)
- 1 foam insert with 36 compartments for Tokens, Discs and Standees (CEMEGW035BO)
- 1 foam insert with 38 compartments for Token, Discs and Standees (CEMEGX035BO)
- 1 matching foam topper

Dimensions of the inserts:

- CEMEGY080BO: 285 mm x 275 mm x 80 mm total height (70 mm usable height + 10 mm foam base)
- CEMEGW035BO: 285 mm x 275 mm x 35 mm total height (25 mm usable height + 10 mm foam base)
- CEMEGX035BO: 285 mm x 275 mm x 35 mm total height (25 mm usable height + 10 mm foam base)

The Set extends ca. 3 cm over the edge of the game box.

- ready to use: no assembling necessary
- fine pored foam, Made in Germany
- chlorine free and acid free
- CFC-free

With "Forgotten Circles", the Gloomhaven adventure continues. To enable you to clearly sort and safely transport the game materials in the original game box, Feldherr has this foam set for you.

- The set fits exactly into the Gloomhaven: Forgotten Circles board game box by Cephalofair Games.
- Suitable for all cards (sleeved or unsleeved), the Character Board, Envelopes, Monster Standees, Character Tuck Boxes, Monster Stat Sheets, Monster Stat Sleeves, Plastic Stands, Revised Player References, Tiles as well as the Character Pad
- The lid of the game box closes flush.

The set contains:

- 1 foam tray for game material (DQMESC045BO)
- 1 foam topper

The foam tray is divided into 11 compartments. The large, centrally located, compartment will hold the large Character Tuck Box, Monster Stat Sleeves, Monster Stat Sheets and the Envelopes. Three further, larger compartments provide space for the (sleeved or unsleeved) cards. The remaining seven compartments allow you to clearly organize the small game components.

Of course, the fine-pored foam reliably protects your game material. Fragile parts stay intact, sensitive surfaces remain free from scratches.

When you are done sorting everything into the tray, you place the matching foam topper on it – your game materials are thus safe from falling out during transport. Now place the larger game components – Rule- and Scenariobook and Sticker Sheet – on top. Close the lid and off you go!

The foam tray has the dimensions: 280 mm x 215 mm x 45 mm total height (35 mm usable height + 10 mm foam base).

- fine-pored foam – Made in Germany
- chlorine free and acid free
- CFC-free

This expansion takes you as an investigator into the unexplored, treacherous wilderness of the Amazon. But lianas and jaguars are the least of your problems. For in the depths of the jungle, secrets of past civilizations await discovery, as do ancient monsters with insatiable appetites.

The disastrous jungle on the gaming table is more than enough - with this Feldherr foam set you can protect your miniatures and keep order in your board game box.

- The set fits exactly into the original board game box of the Mansions of Madness Second Edition expansion "Path of the Serpent" by FFG.
- Provides space for all 12 figures plus all accessories from the box.
- The lid of the board game box protrudes approx. 4 cm.

The set includes:

- 1 foam tray for miniatures and game material (AFLC100BO)
- 1 foam inlay for miniatures and game material (BKMEUJ060BO)
- 1 foam topper

A large foam tray fits exactly into the original game box. It is divided into five compartments for miniatures and accessories, and a large compartment for the foam inlay.

The separate inlay has a bottom and can therefore also be removed with contents. In the inlay the 4 Investigator figures can be safely stored together with 5 Monster miniatures. Each miniature gets its own custom-fit compartment. This prevents collisions, protects the sensitive parts from breakage and painted miniatures are spared from scratches and flaking paint.

In the small compartments you sort the person, door and wall tokens.

On the foam inlay there is still enough space to place the 17 map tiles and the four Investigator cards.

For the Ancient Basilisk and the two Temple Guardians three compartments are reserved on the large foam tray. The small cards, such as Spell or Condition cards, have a compartment with a finger-wide recess. The Overgrowth and Rubble Tokens are located in the last compartment.

Finally, the supplied foam topper ensures that the contents do not bump against the lid during transport and that everything stays where it belongs. The rulebook lies on top.

This way all the Investigator and Monster figures are safely packed, the game material is neatly stowed away and you are best prepared for the dangers of the jungle.

- The foam tray has the dimensions: 285 mm x 285 mm x 100 mm total height (90 mm usable height + 10 mm foam base)
- The foam inlay has the dimensions: 178 mm x 178 mm x 40 mm total height (30 mm usable height + 10 mm foam base)

- high-quality, fine pored foam
- CFC-free
- chlorine and acid-free
- Made in Germany

The popular board game Gloomhaven comes with hundreds of small parts – and 18 marvelous miniatures. While the myriads of game components beg to be sorted so you don't lose any vital game components, the models beg for a safe place to be stored in. Our foam set for the Gloomhaven board game box will solve both problems in one go. The Set not only provides you with a custom sorting solution, but also includes a FREE magnetic box with a matching foam insert for your miniatures.

- Three custom inserts for the board game box allow you to clearly organize your game components. One insert is reserved for cards, Sheets, Sealed Envelopes and HP/XD-Dials. Two inserts will hold all the Tokens, Discs, Standees and Plastic Stands.
- The inserts for the game box are designed to be stored next to the Character Tuck Boxes. Stored this way in the game box, all components will fit like a glove.
- The Set comes with a magnetic box and a custom insert for your miniatures: There is thus no need to worry about the well-being of your models ever again.
- Includes two matching foam toppers: one for the game box, one for the magnetic box. The toppers are placed on top of the inserts and make sure everything stays in place even if you turn the boxes upside-down.

The larger game components like the rule book, the scenario book and the map boards are simply placed on top of the inserts (the set extends ca. 3 cm over the edge of the game box). The magnetic box is best stored outside the game box.

The Set contains:

- 1 Magnetic Box yellow
- 1 Foam-Insert for the magnetic box with 18 compartments for miniatures (HSMEBL035BO)
- 1 Foam-Insert with 12 compartments for cards (CEMEGY080BO)
- 1 Foam-Insert with 36 compartments for Tokens, Discs and Standees (CEMEGW035BO)
- 1 Foam-Insert with 38 compartments for Token, Discs and Standees (CEMEGX035BO)
- 1 matching foam topper for the game box
- 1 matching foam topper for the magnetic box

Dimensions of the Inserts:

- HSMEBL035BO: 275 mm x 172 mm x 35 mm total height (25 mm usable height + 10 mm foam base)
- CEMEGY080BO: 285 mm x 275 mm x 80 mm total height (70 mm usable height + 10 mm foam base)
- CEMEGW035BO: 285 mm x 275 mm x 35 mm total height (25 mm usable height + 10 mm foam base)
- CEMEGX035BO: 285 mm x 275 mm x 35 mm total height (25 mm usable height + 10 mm foam base)

Dimensions of the magnetic box:

- 275 mm x 172 mm x 40 mm inner dimensions
- 290 mm x 180 mm x 45 mm outer dimensions

- ready to use: no assembling necessary
- fine pored foam, Made in Germany
- chlorine free and acid free
- CFC-free

On this Feldherr Full-Size foam tray, divided into 11 compartments in two different sizes, you have room for your large and medium-sized monster figures. The three large compartments are designed for the miniatures on large base, such as the Shoggoths. In the 8 small compartments you can safely store the figures on medium base (e.g. Star Spawn or the Chtonians).

Your miniatures are clearly stored here and sensitive parts are optimally protected against breakage. You don't have to worry about painted figures either, because they are kept in precisely fitting compartments, protected from scratches, abrasion and flaking paint.

The 11 compartments have the following dimensions:

- 8 compartments: 71 mm long x 70 mm wide x 90 mm deep
- 3 compartments: 98 mm long x 85 mm wide x 90 mm deep

The foam tray has the dimensions: 345 mm x 275 mm x 100 mm total height (90 mm usable height + 10 mm foam base).

- high-quality, fine pored foam
- CFC-free
- chlorine and acid-free
- Made in Germany

In the 26 compartments of this Feldherr Full-Size foam tray, you can keep your little monster figures and investigators safe. The 20 larger compartments are designed for monster miniatures on a small base, such as the Mi-Gos or Hounds of Tindalos. In the 6 small compartments you can neatly stowe the investigator figures.

Your miniatures are clearly stored here and sensitive parts are optimally protected against breakage. You don't have to worry about painted figures either, because they are kept in precisely fitting compartments, protected from scratches, abrasion and flaking paint.

The 26 compartments have the following dimensions:

- 4 compartments: 70 mm long x 52 mm wide x 50 mm deep
- 8 compartments: 59 mm long x 42 mm wide x 50 mm deep
- 8 compartments: 54 mm long x 42 mm wide x 50 mm deep
- 6 compartments: 52 mm long x 25 mm wide x 50 mm deep

The foam tray has the dimensions: 345 mm x 275 mm x 60 mm total height (50 mm usable height + 10 mm foam base).

- high-quality, fine pored foam
- CFC-free
- chlorine and acid-free
- Made in Germany

Also in the Third Edition, a team of fearless investigators will continue to stand in the way of the Ancient Ones in order to save our world from its reign of terror. This further development of the board game classic comes with some significant innovations, as well as new game material.

Just like the game developers, we have also further developed our foam set for the 'Arkham Horror' board game box. This allows you to concentrate fully on the in-game investigation, without having to search for lost tokens or cards.

- The set fits exactly into the original board game box of "Arkham Horror 3rd Edition".
- Suitable for the entire game content of the Third Edition.
- The lid of the board game box protrudes approx. 2 cm.

The set contains:

- 1 foam tray with 8 compartments
- 1 foam inlay with 15 compartments
- 1 foam topper

The foam tray is divided into 1 large compartment for the foam inlay and 7 additional compartments for storing the game components.

In the large compartment lies the foam inlay with 15 compartments for sorting the tokens, dice and plastic stands. The insert has a foam base. So you can take it out separately and place the box next to the board.

All tokens, except the Anomaly and Investigator Tokens, can be clearly sorted here. One compartment is occupied by the dice and the corner compartment is reserved for the plastic stands.

On top of the 40 mm high inlay, there is still room for the 12 Map Tiles, which fit exactly into it. Also the disassembled Event Deck Holder, as well as the Scenario and Investigator Sheets can be stored here.

On the large insert there are a total of 5 compartments available for the game cards. They are provided with finger-wide recesses, which makes it easier for you to remove the stacks.

3 card compartments provide room for the large cards, such as the Event and Anomaly Cards. Two compartments are reserved for the smaller cards, such as Monster and Status Cards. Of course, all cards also fit in with sleeves.

There are still two compartments left in which you can sort the Investigator Tokens and the five Anomaly Tokens.

The set for "Arkham Horror 3rd Edition" is rounded off with the matching foam topper. With this all accessories stay in place, even if the box is upside down during transport. You can place the rulebooks on the foam topper.

Hereby, everything is neatly and securely stowed away so that no Money Token gets lost. Cards and tokens are quickly at hand and you save a lot of time and nerves when setting up the game.

- The foam tray has the dimensions: 285 mm x 285 mm x 80 mm total height (70 mm usable height + 10 mm foam base).
- The foam inlay has the dimensions: 208 mm x 183 mm x 40 mm total height (30 mm usable height + 10 mm foam base).

- high-quality, fine pored foam
- CFC-free
- chlorine and acid-free
- Made in Germany

Centred in the hustle and bustle of the wild twenties, a black shadow lies over the city of Arkham, Massachusetts. The Ancient One, a terrible creature from a world beyond time and space, awakes and threatens to enter our world through the opening gates to subjugate it. A team of fearless investigators is our world's last resort.

This foam tray set may not be the last chance to save your board game box. But it protects you from investigations for lost markers and cards, and ensures order and safekeeping of the game components.

These inserts are suitable for the Second Edition of the board game.

The Set contains:

- 1 foam tray for the board game box with 8 compartments
- 1 foam inlay with 12 compartments
- 1 foam topper

The foam tray fits exactly into the 'Arkham Horror' board game box. It is divided into 8 tailor-made compartments to store the game components.

In the big compartment of the mat lies the additional foam inlay. It provides 12 compartments for sorting the Investigator Status Tokens, the Terror Marker, the Doom Tokens and Activity Markers, as well as the Explored and Closed Markers into the individual compartments. Two compartments are reserved for the Plastic Investigator Stands.

The 40 mm high inlay is only intended for sorting small parts and has no extra bottom. On top of the 40 mm high inlay, there is also room for the Investigator Sheets, which fit in here exactly.

There are a total of 3 compartments available for the game cards. They are equipped with finger-wide recesses, which make it easier for you to remove them.

2 compartments offer space for the Ancient One Cards and one is reserved for the smaller Investigator Cards. The cards also fit in here with sleeves.

The Investigator and Monster Markers, as well as the Gate Markers and the First Player Marker, can be sorted into custom-cut compartments. A small rectangular compartment accomodates the dice.

This set for 'Arkham Horror' is rounded off with the matching foam topper. So everything stays in place, even if the box is turned upside down during transport. On the foam cover you can place the game board and the rulebook.

Hereby everything is neatly and securely stowed away so that no Money Token gets lost. Cards and markers are quickly at hand and you save quite some time and nerves for setting up the game.

The lid of the board game box protrudes about 1 cm.

- The foam tray has the dimensions: 285 mm x 285 mm x 60 mm total height (50 mm usable height + 10 mm foam base)
- The foam inlay has the dimensions: 181 mm x 158 mm x 40 mm.

- high-quality, fine pored foam
- CFC-free
- chlorine and acid-free
- Made in Germany

All components of the Two Player Starter Set of Fallout: Wasteland Warfare clearly stowed in the game box.

Item bundle content:
1 x AFMEGP080BO Foam tray for Fallout: Wasteland Warfare
1 x AFBA010 285 mm x 285 mm x 10 mm foam topper / layer

The popular board game Gloomhaven comes with massive amounts of game components: Hundreds of Tokens, Discs, Standees and cards need to be organized. In addition, 18 miniatures long for a safe place to protect them from getting damaged. Our foam set for Gloomhaven includes three custom inserts for the game box which help you to get sorted and a sturdy MINI MINUS bag with a matching insert for the miniatures. The Set thus solves both problems in one sweep.

- Three custom inserts for the board game box allow you to clearly organize your game components. One insert is reserved for cards, Sheets, Sealed Envelopes and HP/XD-Dials. Two inserts will hold all the Tokens, Discs and Standees.
- The three inserts for the game box are meant to be placed next to the Character Tuck Boxes inside the game box. If you organize you components this way, nothing will slip or wobble in the game box.
- The MINI MINUS bag comes with an additional, custom insert for your miniatures: There is thus no need to worry about the well-being of your models ever again.
- Includes two matching foam toppers: one for the game box, one for the MINI MINUS. The toppers are placed on top of the inserts and make sure everything stays in place.

The larger game components like the rule book, the scenario book and the Map Boards are simply placed on top of the box-inserts (the set will extend ca. 3 cm over the edge of the game box). The MINI MINUS is best stored outside the game box.

The Set contains:

- 1 MINI MINUS bag
- 1 Foam-Insert for the MINI MINUS with 18 compartments for miniatures (HSMEBL035BO)
- 1 Foam-Insert for the board game box with 12 compartments for Sheets, Dials and cards (CEMEGY080BO)
- 1 Foam-Insert for the board game box with 36 compartments for Tokens, Discs und Standees (CEMEGW035BO)
- 1 Foam-Insert for the board game Box with 38 compartments for Tokens, Discs und Standees (CEMEGX035BO)
- 1 matching foam topper for the MINI MINUS
- 1 matching foam topper for the board game box

Dimensions of the foam inserts:

- HSMEBL035BO: 275 mm x 172 mm x 35 mm total height (25 mm usable height + 10 mm foam base)
- CEMEGY080BO: 285 mm x 275 mm x 80 mm total height (70 mm usable height + 10 mm foam base)
- CEMEGW035BO: 285 mm x 275 mm x 35 mm total height (25 mm usable height + 10 mm foam base)
- CEMEGX035BO: 285 mm x 275 mm x 35 mm total height (25 mm usable height + 10 mm foam base)

Dimensions of the MINI MINUS:

- 275 mm x 172 mm x 40 mm inner dimensions
- 290 mm x 180 mm x 45 mm outer dimensions

- ready to use: no assembling necessary
- fine pored foam, Made in Germany
- chlorine free and acid free
- CFC-free

In addition to new scenarios, mythos events and a new puzzle for the app, the expansion 'Horrific Journeys' for Mansions of Madness Second Edition comes along again with detailed miniatures and lots of game material. In order to store these neatly and well protected in the box, we have the matching foam set for you.

- The set fits exactly into the original board game box of the 'Horrific Journeys' expansion (MAD27) for Mansions of Madness 2nd Edition.
- It holds all miniatures and the entire game material.
- The lid of the board game box protrudes approx. 2 cm.

The set consists of:

- 1 foam tray with 8 compartments (AFMEIT085BO)
- 1 foam inlay with 9 compartments (BKLD040)
- 1 foam topper

One large foam tray fits perfectly into the original game box. The tray is divided into 7 smaller compartments for miniatures and game accessories, and one large compartment for the foam inlay.

This separate inlay (without foam base) can accommodate 3 investigator figures and 4 monster miniatures. Each miniature is assigned a matching compartment. These are placed here isolated from each other in precisely fitting compartments. This avoids collisions, protects the sensitive parts from breakage and painted miniatures are spared from scratches and flaking colors.

Upon this mat is still enough space to store the 18 map tiles and the 4 investigator cards.

For the Formless Spawn monster, one compartment is reserved on the large foam tray. Also the investigator Silas Marsh, as well as the remaining two monster figures find a protected place here.

The small cards, such as spell or condition cards, get a compartment with a finger-wide recess.

To sort the tokens, 4 compartments remain on the tray and the inlay.

Hereby, your miniatures are safely stowed away and the game material is clearly arranged and quickly available.

Finally, the matching foam topper ensures that the contents do not hit the lid during transport and that everything remains in their compartments. Your box is therefore well prepared for the journey to the next game.

- The foam tray has the dimensions: 285 mm x 285 mm x 85 mm total height (75 mm usable height + 10 mm foam base)
- The foam inlay has the dimensions: 178 mm x 178 mm x 40 mm total height

- high-quality, fine pored foam
- CFC-free
- chlorine and acid-free
- Made in Germany

This transport solution is specially designed for Scythe "The Wind Gambit" expansion. The seven airship miniatures are protected in a space-saving and tailored form tray. The related bases and stands, resolution and airdrop tiles can be easily and practically sorted in an additional ziplock bag.

The Set contains:

- 7 compartments for airship miniatures
- ziplock bag
- foam topper (5 mm height)
- The foam tray has the dimensions: 285 mm x 118 mm x 45 mm total height (35 mm usable height + 10 mm foam base)

- Made in Germany
- high-quality, fine pored foam
- Fine pored quality foam Made in Germany
- chlorine and acid free
- tailored and space-saving foam tray for airship miniatures for Scythe The Wind Gambit
- cardboard for arrange and stow cards, bases and stands

With the last release of the expansion trilogy, 'The Rise of Fenris', your Scythe collection is finally complete. So that you don't lose track of all the figures, tokens, meeples and cards, and to store everything in the large Legendary Box, we have the right foam set for you here.

- The set fits exactly into the original Scythe Legendary Box (STM634)
- Offers space for all game components from the core box as well as the 3 expansions 'Invaders from Afar', 'The Wind Gambit' and 'The Rise of Fenris'

It consists of:

- 1 foam tray with 23 compartments for miniatures and wooden parts (AVMEJE045BO)
- 1 foam tray with 46 compartments for miniatures, wooden parts and tokens (AVMEJF050BO)
- 1 foam tray with 9 compartments for player mats, cards and coins (AVMEJG055BO)
- 1 foam topper

A total of 3 trays help you to keep your Scythe collection organized even after 3 expansions.

The first insert offers space for the airship miniatures of all nations. Also, there are 9 additional compartments for storing the wooden parts. Action and star tokens, workers as well as all other tokens for the factions can be arranged here clearly by nation.

The remaining compartments are reserved for the miniatures of the Fenris faction.

On the second mat you can store the Mech miniatures. They will also be sorted according to their nation. And so that the leaders are also safely accommodated, each of them gets a perfectly fitting compartment.

If you paint your miniatures, you can be assured that the colors of the figures will not flake or scratch during transport thanks to the tailor-made compartments. Sensitive parts, such as the mechs' antennas or the leaders' weapons, are also protected from damage.

4 compartments remain for sorting the resource tokens and a fifth compartment for the multiplier and encounter tiles.

The third foam tray in this set takes care of the rest of the game material.

A large compartment accommodates the player mats. Next to it is a compartment for the coins. On the other side there is an elongated compartment for the airships' plastic stands and one for storing the power dials. The contents of box E from the 'Rise of Fenris' expansion may remain secret until the end. This can be placed unopened in a separate compartment with a finger-wide recess.

To make sure that the game cards don't get mixed up, you still get a suitable compartment for each card size. The four compartments are also suitable for cards with sleeves.

- The compartments are for cards only. Larger cardboard parts, such as the tiles, are placed on the foam topper.

In closing, the matching foam topper ensures that the contents of the upper mat are completely surrounded by foam. You can place the larger cardboard parts, the rulebooks, game sheets and the game board on the topper.

Hereby, all plastic miniatures, wooden parts, cards and other game accessories are neatly and securely stowed away. The clearly arranged storage allows you to keep an overview at all times, saves time when setting up the game and no token gets lost.

The foam trays have the following dimensions:

- AVMEJE045BO: 350 mm x 285 mm x 45 mm total height (35 mm usable height + 10 mm foam base)
- AVMEJF050BO: 350 mm x 285 mm x 50 mm total height (40 mm usable height + 10 mm foam base)
- AVMEJG055BO: 350 mm x 285 mm x 55 mm total height (45 mm usable height + 10 mm foam base)

- high-quality, fine pored foam
- CFC-free
- chlorine and acid-free
- Made in Germany

After the end of the Great War, empires have have risen and fallen. The economy has stabilized, morale is high and the military is well positioned. There are reports from rural areas about soldiers with glowing eyes, but they seem to be harmless.

The latest release of the expansion trilogy also features new campaigns and modules, new miniatures, markers and cardboard parts for your gaming table. To keep it all clear and safe in the box, we have this suitable custom foam set for you.

- The set fits exactly into the original board game box of the Scythe expansion 'The Rise of Fenris'.

It consists of:

- 1 foam tray with 9 compartments for miniatures, wooden parts and dice (BDMEJD050BO)
- 1 foam tray with 8 compartments for miniatures and wooden parts (BDMEJC050BO)
- 2 foam topper

Two foam inserts keep your box tidy with a total of 17 compartments individually tailored to game material and miniatures.

The first tray offers space for all plastic miniatures and wooden parts from box D. The wooden tokens and meeples are sorted into one large compartment, the miniatures get individually cut compartments. If you want to paint your figures, you can be sure that the colors will not flake or scratch during transport. There is also a separate tray for the two cubes.

The contents of the mystery box E can remain secret until the end. This one can be placed unopened in a separate compartment with a finger-wide recess.

With the second insert you get 8 tailor-made compartments for the figures and wooden parts from the boxes A, B and C.

All 13 plastic miniatures, 62 wooden tokens and meeples, as well as the two dice are neatly stowed away. The clearly arranged storage allows you to keep an overview at all times, saves time when setting up the game and no marker gets lost.

To be prepared for new players who don't yet know what to expect, you can cover both inserts individually with the matching toppers.

On these two foam toppers there is still enough space for the rulebook and the cardboard parts.

The foam trays have the following dimensions:

- BDMEJD050BO: 285 mm x 118 mm x 50 mm total height (40 mm usable height + 10 mm foam base)
- BDMEJC050BO: 285 mm x 118 mm x 50 mm total height (40 mm usable height + 10 mm foam base)

- high-quality, fine pored foam
- CFC-free
- chlorine and acid-free
- Made in Germany

In order to defeat the demons, ghosts and monsters that invaded feudal Japan, you better be well-organized. Our foam set for "Shadows of Brimstone: Forbidden Fortress" enables you to sensibly sort and safely store Tengus, Ninjas & Co. in the original game box.

The set fits exactly into the original "Shadows of Brimstone: Forbidden Fortress" board game box by Flying Frog Productions.
Suitable for all 27 miniatures and all tokens, small cards, and dice of the core set.
The lid of the board game box extends approx. 2-3 cm.
The set contains:

1 foam tray with 29 compartments for miniatures and cards (DAMEMR075BO)
1 foam tray with 30 compartments for cards, tokens and dice (DAMEMS030BO)
1 matching foam topper
The foam tray with 29 compartments accommodates all 27 miniatures of the game. For each model there is an exclusive compartment – Your figures are thus kept from slipping around and getting damaged. The fine-pored foam reliably prevents the breaking of delicate parts and the scratching of paint. The other 2 compartments of the tray will hold sleeved or unsleeved small cards (e. g. Map Cards, Threat Cards). The compartments for the cards have finger-thick recesses for easy removal of the decks from the tray.

Further cards as well as all tokens and dice of the game can be sensibly organized in the foam tray with 30 compartments. 4 compartments will hold sleeved or unsleeved small cards, 26 compartments are reserved for tokens and dice.

The matching foam topper completes the set. Just place it on top of the upper tray to ensure that nothing can fall out.

The larger game components – Rulebook, Adventure Book, Large Cards, Map Tiles, Depth Track, Sumo Pledge Rules Collection, CD – are placed underneath the set or on top of it. Then close the lid and you're all set.

The foam trays have the dimensions:

DAMEMR075BO: 465 mm x 285 mm x 75 mm total height (65 mm usable height + 10 mm foam base)
DAMEMS030BO: 465 mm x 285 mm x 30 mm total height (20 mm usable height + 10 mm foam base)
fine-pored foam – Made in Germany
chlorine free and acid free
CFC-free

All 44 Citadel miniatures and the entire game material safely and clearly stowed in the original game box.

In this age of darkness, in a galaxy plagued by strife and terror, the Black Fortress is the last hope to turn the tide of war. Thus, the brave and the desperate alike enter the labyrinth-like halls of this ancient space station in search of long lost, powerful technologies.

The game is packed to the brim with wonderful, detailed miniatures and plenty of game material. So that your box does not become a labyrinth itself and the figures lose themselves in the darkness, we have the suitable foam tray set for you here.

The set fits exactly into the original Games Workshop board game box for 'Warhammer Quest: Blackstone Fortress'.
The lid of the board game box protrudes approx. 1 cm.
The foam tray set contains:
1 foam tray for miniatures (CMMEIO065BO)
1 foam tray for miniatures and game material (CMMEIN040BO)
2 foam topper

Two foam inserts provide order, protection and overview in your box.
A 65 mm high tray is divided into 31 compartments, which are individually tailored to the Explorer and Hostiles miniatures.

Wrapped in soft foam, the finely detailed figures are optimally protected from damage, so that Amallyn Shadowguide can continue to target the hostiles with her Ranger long rifle.

You also don't have to worry about painted models anymore. The tray prevents them from slipping around or colliding with each other, which might ruin hours of painstaking painting. The colors remain intact and free of scratches.
The second mat takes care of the remaining 13 models. Rein's sniper rifle is as safe as Raus' climbing hook, and the claws of the Ur-Ghul remain dangerously sharp.

6 additional compartments help you to organize the game material. One of them is for storing the counters and markers, the one next to them for the dice.
For the game cards you have 4 compartments at your disposal. The large sized one for the exploration cards can also hold the encounter cards, thanks to the additional recess. The compartments are all provided with finger-wide recesses for easy removal of the stacks.

Finally, there is a suitable foam topper on each insert so that the miniatures are completely surrounded by foam. On the lower mat for the game material there is still enough space to place the tiles, the Precipice board with the spacecraft.
Upon the foam toppers, you also place the Explorer and Hostile cards, the database and the hidden vault envelope, the combat track as well as the line-of-sight ruler, along with the booklets.

Hereby, all 44 miniatures are safely stored, all the game material is neatly stowed away and the contents of your box are optimally protected, even on the bumpiest routes to the next expedition.

To ensure that the game under your leadership is a fantastic experience for everyone, this convenient Feldherr Game Master Dashboard Set for Mansions of Madness Second Edition is available for you.

The two plastic trays provide space for everything you need as a game master and ensure that everything is ready at hand.

- The plastic Dashboard-Set creates order on the tabletop, helps you to manage the game in a structured way, and speeds up the game.
- It consists of two plastic trays which are placed on the gaming table.
- You have full control of your game material. Everything can be clearly sorted in the trays and is quickly accessible.
- The Cards also fit in the slots with protective sleeves
- Compatible with the Feldherr Player Dashboards to improve the character management of each player as well
- Available in different colors
- Ready to Use - no assembly required

To ensure that running the game doesn't become an overwhelming obstacle for you, we'll help you with organizing your game materials on the table. Thanks to the two plastic trays, you'll always have the game under control and won't waste time searching for the right token. This keeps the game flowing and the game night will be more than awesome.

The set at a glance:

- Tray 1 features 14 compartments for dice, ID tokens, Search/Interact tokens, Fire/Darkness tokens, Explore/Sight tokens, and 64 card slots for common and unique item cards.
- Tray 1 has the dimensions: 165 mm x 122 mm x 64 mm high

- Tray 2 has 12 compartments for Horror cards, Damage cards, Condition cards and Spell cards, as well as 29 additional compartments for Person tokens, Secret Passage tokens, Barricade tokens, Wall tokens and Door tokens. Among them is a large compartment for the Clue tokens.
- Tray 2 has the dimensions: 155 mm x 150 mm x 64 mm height

As with all 3D-printed models, minor imperfections may occur. The product images are only examples of how the finished product may look. Colors may vary. All products are delivered unpainted.

- thermosoftening plastic
- 3D printed in Germany

The perfect protection for your Gloomhaven miniatures. 18 custom cut-outs for Gloomhaven and a nice colourful magnetic box.
By two hidden magnets on the frontside of the box you can open and close the box easily and quickly. The box is made of one coloured box, covered in cardboard. The cardboard is glued on the bottom of the coloured box and serves on the topside as a hinged lid. So, the magnetbox is not only stable, appealing in design and practical in handling but also lightweight.

Exclusive for Gloomhaven:
- 1 x magnetical box in yellow (40 mm)
- 1 x 35 mm foam tray for Gloomhaven
- 1 x foam topper

- Dimension of the Feldherr half-size (HS) foam tray: 275 mm x 172 mm x 35 mm height
- Fine pored quality foam Made in Germany
- chlorine and acid free
- Made in Germany
- piece density 23,0 kg/pro Kubikmeter (+/- 2,0)

Nice, easy to store and practical magnetic box in the half-size format. The HSMB040 magnetic box has an internal height of 40 mm.

- inner Dimension: 275 mm x 172,5 mm x 40 mm inside height
- outer Dimension: 290 mm x 180,0 mm x 45 mm
- Magnetic closure

The bag is perfect for carrying all your figures from Arcadia Quest and Beyond The Grave. It fit all 61 figures of the games in the bag and there is additional space for more than 9 figures.

The bag is complete filled with foam and stores:

Special 35 mm Foam Tray for 12 Super Dungeon Explore figures.

Special 50 mm Foam Tray for 12 Super Dungeon Explore figures.

Special 50 mm foam tray for 8 big Arcadia Quest figures.

60 mm Raster foam tray

The bag is perfect for carrying all your figures from Descent - Journeys in the Dark. It fit all 39 figures of the game in the bag and there is additional space for 27 figures from the expansions plus accessories.

The bag is complete filled with foam and stores:

Special Foam Tray for 12 Descent figures. 4 of these are for large monsters.

Dimension Feldherr Half-Size (HS) Foam Trays: 275 mm x 172 mm x 75 mm.
2 slots: 80 mm x 90 mm x 65 mm
2 slots: 80 mm x 55 mm x 65 mm
8 slots: 36 mm x 33 mm x 65 mm
Made in Germany
High-quality, fine pored foam material; CFC-free t

Special Foam Tray for 20 Descent figures.

Special Foam Tray for 16 Descent figures. 4 of these are for large monsters.

Dimension Feldherr Half-Size (HS) Foam Trays: 275 mm x 172 mm x 60 mm.
8 slots: 36 mm x 33 mm x 50 mm
4 slots: 58 mm x 72 mm x 50 mm
4 slots: 36 mm x 33 mm x 50 mm
Made in Germany
High-quality, fine pored foam material; CFC-free t

Special Foam Tray for 20 Descent figures.

Dimension: 172 mm x 275 mm x 50 mm
12x slot size 54 x 35 x 40 mm height
6 x slot size 27 x 35 x 40 mm height
Made in Germany

Raster foam tray