Tuotehaku

Ruutunäkymän liikennevaloissa vihreä on heti saatavilla, punainen juuri nyt loppu varastosta, keltainen ei vielä ilmestynyt tai huutomerkin kera ei hyllyvalikoimaa, eli me tilaamme sitten, kun sinä olet tilannut meiltä. Saatavuusinfossa kerrotaan tarkemmin saatavuustiedoista.

Haun tulokset 1 - 11 / 11



Feldherr Foam Set For Dungeons And Dragons: Castle Ravenloft Board Game - Box
Feldherr Foam Set For Dungeons And Dragons: Castle Ravenloft Board Game - Box

Welcome to Castle Ravenloft. The lord of the castle invites you to dinner and you are on the guest list - probably also on the menu. Because Count Strahd is thirsting for fresh blood and the monsters hiding behind the castle walls are no less hungry. Only if you and your fellow companions stick together will you survive the adventures that await you.

To keep all your tokens, markers and cards together and to make sure nobody loses their head early, here is the Feldherr foam set for your "Dungeons & Dragons: Castle Ravenloft" board game box.


- The set fits exactly into the original game box for "Dungeons & Dragons: Castle Ravenloft Board Game" by Wizards of the Coast.
- Provides space for all 42 miniatures and the entire game material.
- The lid of the board game box protrudes approx. 6-7 cm.

The set includes:


- 2 foam trays for miniatures (DKMEPU065BO)
- 1 foam tray for large miniatures and cards (DKMEPT085BO)
- 1 foam tray for tokens and markers (DKMEPV045BO)
- 1 foam topper

The foam trays are half as wide as the game box. Therefore, two are placed next to each other inside the box.

On one side are the two foam inserts for the majority of the miniatures. Every hero, every monster and every single villain is assigned his own compartment.

From Flesh Golem to Blazing Skeletons to Kobold Skirmisher - every figure is securely wrapped in foam. Precisely fitting compartments ensure that the miniatures remain safely in place even when on the move. Thus not only the fine parts are protected from damages, also the colors of painted figures are safe from abrasion and scratches.

On the other two inserts next to it you place the large miniatures and the accessories. A big compartment houses the Dracolich Gravestorm, three smaller ones the Gargoyles.

Two compartments are reserved for the cards. These card slots are also suitable for cards with sleeves.

The fourth tray helps you sort the tokens and markers. You can sort them easily and clearly here. This saves time and nerves when building the game and no Hit Point token gets lost. Of course, the dice also gets its own compartment.

With the supplied foam topper you cover the mats so that everything is securely wrapped in foam and nothing falls out of the inserts during transport. The larger cardboard parts - the Hero and Villain cards, the Dungeon tiles and the booklets - are placed on the topper.

With it, all miniatures are safely packed, the game material neatly stowed away and the contents of your box optimally prepared for transport.

 

The foam trays have the following dimensions:


- DKMEPU065BO: 300 mm x 150 mm x 65 mm total height (55 mm usable height + 10 mm foam base)
- DKMEPT085BO: 300 mm x 150 mm x 85 mm total height (75 mm usable height + 10 mm foam base)
- DKMEPV045BO: 300 mm x 150 mm x 45 mm total height (35 mm usable height + 10 mm foam base)


- high-quality, fine pored foam
- CFC-free
- chlorine and acid-free
- Made in Germany

  !   tilattava tuote
47.80 €
Feldherr Foam Set For Dungeons And Dragons: The Legend Of Drizzt - Core Game Box
Feldherr Foam Set For Dungeons And Dragons: The Legend Of Drizzt - Core Game Box

Mercenaries, assassins, shadow dragons, gods, and demons. The list of those with a desire to kill you is very long. But what would a legendary adventurerer be without challenges to overcome?

It's not just in the depths of the Underdark or the icy plains of Ice Wind Dale that hefty challenges await you. Just getting the 40 miniatures undamaged from one place to another is sometimes an undertaking worthy of a hero's song. We can't sing you a song, but with the Feldherr foam set, we can help you get your figures unharmed from A to B and neatly store your game material. That way, everything is safely packed and neatly organized.


- The foam set fits into the original board game box of the Dungeons & Dragons: The Legend of Drizzt core game.
- 5 foam inserts provide space for the 40 plastic miniatures, 200 cards, 70 tiles, and the game materials from the core game.
- The regular-sized cards also fit with protective sleeves.
- Adventure Book and Rulebook are stored separately on the foam topper in the box.
- The lid of the board game box protrudes about 8 cm.
- For more stability during storage and transport, the Flex Cross Band size L is also included in the set.
- transportable and tilt-proof - vertical storage possible

To safely store your fantastic miniatures, we've packed 3 foam inserts with custom-fit compartments into the box. Whether hero or monster, Drizzt or Errtu, we take care of each of your 40 miniatures. Each model gets its own compartment. Thanks to the custom-fit cut, the figures have a tight fit. Nothing can slip and bump against each other, even when transported through the Underdark. The soft, fine-pored foam protects delicate parts from breaking off, and the colors of your painted models are safe from ugly scratches and chipping paint.

After your miniatures are properly stored, we turn our attention to your game material. You can store your game cards next to Errtu. In the insert are two compartments in which your regular-sized game cards easily fit. Of course, they also fit with protective sleeves.

Hero tiles, Villain tiles, and the tiles to create the game map receive an insert with three compartments.

Sort the 200 tokens and markers and the die, into the insert with the 16 compartments and into the remaining compartments of the other inserts.

The included foam toppers complete the set. This way, the miniatures are securely packed all around and during transport, nothing bumps against the lid of the box.

The Adventure Book and the Rulebook are placed separately on the foam topper inside the box.

Hereby, all miniatures are safely packed, the game material is neatly stowed away, and you are well-prepared for the next adventures.

The lid of the board game box protrudes significantly. To ensure a stable, transportable fit of the lid, the set also contains a Feldherr Flex Cross Band green (size L).

The foam inserts have the dimensions:


- DKMFFA095BO: 300 mm x 150 mm x 95 mm total height (85 mm usable height + 10 mm foam base)
- DKMEPU065BO: 300 mm x 150 mm x 65 mm total height (55 mm usable height + 10 mm foam base)
- DKMEPV045BO: 300 mm x 150 mm x 45 mm total height (35 mm usable height + 10 mm foam base)
- ABMESX045BO: 300 mm x 300 mm x 45 mm total height (35 mm usable height + 10 mm foam base)


- high-quality, fine pored foam - Made in Germany
- chlorine and acid-free

  !   tilattava tuote
65.80 €
Feldherr Foam Set For Dungeons And Dragons: Wrath Of Ashardalon Board Game - Box
Feldherr Foam Set For Dungeons And Dragons: Wrath Of Ashardalon Board Game - Box

The last remaining humans, dwarves and elves, who settle at the foot of Firestorm Peak, already have it hard enough. They must defend themselves against the marauding gangs of orcs and goblins, and against even greater horrors lurking in the shadows. To make matters worse, a new villain has made the volcano his new lair: the red dragon Ashardalon ...

To make sure you don't have to worry about bent weapons or missing healing surge tokens - thus you can concentrate on your heroes and their upcoming adventures - here's the Feldherr foam set for your "Wrath of Ashardalon" board game box.


- The set fits exactly into the original game box for "Dungeons & Dragons: Wrath of Ashardalon Board Game" by Wizards of the Coast.
- Provides space for all 42 miniatures and the entire game material.
- The lid of the board game box protrudes approx. 6-7 cm.

The set includes:


- 2 foam trays for miniatures (DKMEPU065BO)
- 1 foam tray for large miniatures and cards (DKMEPT085BO)
- 1 foam tray for tokens and markers (DKMEPV045BO)
- 1 foam topper

The foam trays are half as wide as the game box. Therefore, two are placed next to each other inside the box.

On one side are the two foam inserts for the majority of the miniatures. Every hero, every monster and every single villain is assigned his own compartment.

From Otyugh to the Cave Bears to Kobold Dragonshield - every figure is securely wrapped in foam. Precisely fitting compartments ensure that the miniatures remain safely in place even when on the move. Thus not only the fine parts are protected from damages, also the colors of painted figures are safe from abrasion and scratches.

On the other two inserts next to it you place the large miniatures and the accessories. A big compartment houses the Red Dragon Ashardalon, three smaller ones the Grells.

Two compartments are reserved for the cards. These card slots are also suitable for cards with sleeves.

The fourth tray helps you sort the tokens and markers. You can sort them easily and clearly here. This saves time and nerves when building the game and no Hit Point token gets lost. Of course, the dice also gets its own compartment.

With the supplied foam topper you cover the mats so that everything is securely wrapped in foam and nothing falls out of the inserts during transport. The larger cardboard parts - the Hero and Villain cards, the Dungeon tiles and the booklets - are placed on the topper.

With it, all miniatures are safely packed, the game material neatly stowed away and the contents of your box optimally prepared for transport.

 

The foam trays have the following dimensions:


- DKMEPU065BO: 300 mm x 150 mm x 65 mm total height (55 mm usable height + 10 mm foam base)
- DKMEPT085BO: 300 mm x 150 mm x 85 mm total height (75 mm usable height + 10 mm foam base)
- DKMEPV045BO: 300 mm x 150 mm x 45 mm total height (35 mm usable height + 10 mm foam base)


- high-quality, fine pored foam
- CFC-free
- chlorine and acid-free
- Made in Germany

  !   tilattava tuote
47.80 €

Hakusivu: 1

    

Uutuuksia