This Campaign 3 insert is designed to be compatible with Founders of Gloomhaven.

The design provides both efficient storage and improved game play. The trays can be utilised during the game, and they greatly aid set-up and clear-away times. The insert is arranged in three layers. All cards can be sleeved. There are separate trays for the tier 2 & 3 buildings and two trays to split the prestige building tiles. The prestige building trays are designed so it is easy to move the top ones around and see the titles of the other building below. The boards and rules go on top of the trays acting as a lid, allowing the game to be stored vertically. First the adviser/proposal board and the player mats are placed in the recess on the left hand side of the insert. This is followed by the main game board, and then resource tracker board and rules.

This product consists of a flat-pack of 6 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

This Campaign 3 insert is designed to be compatible with Gaia Project.

The design provides both efficient storage and improved game play. The trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. With the top layer removed you can see the second layer of trays underneath. Note the space reserved on the left for the space sector tiles. These are held in place by the other trays around them. Each faction has their own tray for it's pieces. These can be used in-game to store the components not yet placed on the board. Three similar sized trays also store the scoring tiles, the advanced tech tiles and the QI cubes. These are the trays for the federation tokens and the standard tech and round booster tiles. Note that each type of token/tile has it's own slot to make access easier during game-play. The card trays are sized to fit sleeved cards. The boards and rules go on top of the trays acting as a lid, allowing the game to be stored vertically. First go the faction boards, followed by the research board in it's wider recess holding it in place. Lastly go the rulebook and scoring board. With everything packed right the lid will close flush with the box.

This product consists of a flat-pack of 6 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

Note: Insert designed for games with external box dimensions of 30.0 x 30.0 x 7.5 cm.

Also note that this is the second version of insert for Great Western Trail.

This Campaign 2 insert is designed to be compatible with Great Western Trail, and includes space for the Rails to the North Expansion. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules act as a lid on top of the trays. There is space for all cards to be sleeved.

The Player trays are designed to store separately each player colours cards, tiles, and pieces. The tray has space for the cards to be sleeved, and there is space for the additional building tile and branchlet pieces from the Rails to the North expansion. Each player tray can be removed from the box and used by the player during game play.The insert includes two trays for cards to store the general cards in the game, all of which can be sleeved. The remaining insert trays are for the other tokens and coins. Three trays are for the worker, hazard and teepee tiles. One tray is for the coins, one for the exchange tokens, and one for the station master tiles.All the trays can be used in-game to help organise components during the game, as well as speeding up setup and clear away times.If you own the muslin drawstring tile bags for the worker, hazard, and teepee tokens, you can remove four of the side trays and put the bags in their place. This means the neutral building and medium town tiles have to double up in a single tray.

The game boards and rule books go on top of the central trays and act as a lid keeping the game pieces in the trays. The lid closes flush, and the box can be stored vertically. When placing them inside, first goes the main game board. This is followed by the expansion board on one side, and the auxiliary add-on tiles with the score pad on the other. Next go the player boards and the expansion rule book. Lastly the game rules go on top, filling the box.

This product consists of a flat-pack of 6 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

This Campaign 3 insert is designed to be compatible with Imperial Settlers and the Aztecs, Atlanteans, Amazons, Why Can't we be Friends, 3 is a Magic Number, We didn't Start the Fire expansions.

The design provides both efficient storage and improved game play. The token trays can be utilised during the game, and they greatly aid set-up and clear-away times. The trays are arranged with card trays down the side and three layers of token trays in the middle. These are the token and tile trays. There are two trays for storing the Atlantean and Aztec tokens. There is one long tray for the goods markers, and another for storing the gold, raze, defense and other tokens. There is space for 810 sleeved cards in total and FFG sleeves have been used in testing. These trays have no bases and are meant to remain inside the game box and not be removed. This game boards need to be placed in the box in the following sequence. First go six faction boards in a recess at the top of each of the large card trays. Then go the score board and a seventh faction board if you have it. The rule books go last, with the main one on top.

Note - the lid will ride high by 4 mm when closed. This is to allow the sleeved cards to be stored vertically, and the boards to be stored on top.

This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

This Campaign 3 insert is designed to be compatible with Isle of Skye and the Journeymen and Druids expansions.

The design provides both efficient storage and improved game play. The trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. The insert is arranged in two layers with the bag of landscape tiles at one end of the box. There are two inserts for storing tiles vertically, one for the scoring tiles, and one for the castle landscape tiles, the druid tiles and the stone tablets. There are two trays for the gold coins with raised ends to hold tightly the player screen walls. The other two trays are for the player pieces, with one slot for the other tokens from the game. The druid tile tray is bottom-less at one end to allow space for the slightly larger stone tablets. These fit neatly in the slot at the end of the tray.The game boards and rules are placed on top of the insert trays acting as a lid. The game can be stored vertically, and transported easily as it fully fills the game box. When packing the box the journeymen progress boards go first, followed by the dolmen from Druids expansion and then the game board. Lastly the rulebooks are placed on top.

This product consists of a flat-pack of 2 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

Note: insert designed for games with external box dimensions of 22.8 x 31.7 x 7.5 cm

This insert is designed to be compatible with Istanbul, and includes space for the Mocha & Baksheesh, and Letters & Seals expansions. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules act as a lid on top of the trays.

There is space for all cards to be sleeved.

Insert features:
* Two player pieces trays
* Two large place and barrow tile trays
* Two mosque and demand tile trays
* Two card and gem/coffee trays
* One coin and barrow extension tray
* One kiosk and letter tile tray

This product consists of a flat-pack of 6 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

Note: insert designed for games with external box dimensions of 25.4 x 25.4 x 7.3 cm

This insert is designed to be compatible with King of Tokyo. The trays have space for the original game and the Power Up! and Halloween expansions. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The board and rules act as a lid on top of the trays.

There is space for all cards to be sleeved.

Insert features:
* One monster standee tray
* One monster board tray
* Two trays for cards
* Two trays for dice, cubes and tokens

This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

This Campaign 2 insert is designed to be compatible with Kingdom Death Monster expansions, providing space for 560 more standard sized cards and 300 more gear cards. The insert is intended to be used together with the FS-KDM insert, and together they will fill the game box.

Please Note - the insert is designed to fit the 1.5 version of the game with box dimensions listed above. The insert works fine with the older 1.3 version, but the box is approximately 7 mm lower and in this case the lid will not close fully flush. Insert designed for game with external box dimensions of 62.8 x 32.5 x 13.5 cm

The trays are stored on the right hand side of the box. There is a slot at the top where the settlement location cards are stored vertically in a slot next to the trays.

These are all the trays that come with this expansion insert. There are four trays for the standard sized cards and two trays for the gear cards. There is space for all cards to be sleeved with quality sleeves.

The gear card trays can be used on in one of two ways: either for gear cards, or placed sideways for standard cards. The latter option can be used if you are storing your gear cards in a binder. If the trays are used for the standard sized cards then there is storage space for a total of 760 sleeved cards in the whole FS-KDM+ insert.

When this insert is combined with the FS-KDM insert they fill the game box. When both inserts are used the total number of sleeved standard cards is increased to 1,860 and the gear cards to 740. With gear cards in a binder folder the total standard cards is increased to 2,250.

This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

Compatible with Kingdom Death Monster.

Please Note - the insert is designed to fit the 1.5 version of the game with box dimensions listed above. The insert works fine with the older 1.3 version, but the box is approximately 7 mm lower and in this case the lid will not close fully flush. Insert designed for game with external box dimensions of 62.8 x 32.5 x 13.5 cm

This Campaign 2 insert is designed to be compatible with Kingdom Death Monster, and the insert has space for a total of 1,300 standard sized cards and 440 gear cards in total. The design provides both efficient storage and improved game play. All of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The insert works together with the FS-KDM+ insert to store, in addition to the main game, many of the game's expansions.

With the boards and top tray removed you can see underneath the next layer of token trays.

Underneath the token trays and board can be seen the card trays. These are split to have different storage capacities for the different kinds of cards. There is room for all cards to be sleeved.

The token trays have been made to be single large trays. This means the tokens can be removed quickly and placed on the game board so that you can easily access the card trays underneath. There are slots for all the token types, and additional slots for tokens and tiles from expansions.

There are also trays for the larger terrain tiles and the settlement event cards. The cards can be sleeved.

Each of the card trays can store sleeved cards, and is made to be removable from the box when needed. The access holes in the tray dividers are off set so that the black card dividers that come with the game can still be used and read while in the tray.

The gear card trays can either be used for gear cards or for the standard sized cards. There is a cut in the side of the tray so the cards can be accessed. Again all cards can be sleeved with quality sleeves. When the trays are used for the larger cards, the total storage capacity for large cards is increased to 1,490 sleeved cards. The smaller gear card slot can be used then for storing the dividers no longer needed if you put your gear cards in a binder.

This product consists of a flat-pack of 12 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

This Campaign 3 insert is designed to be compatible with Le Havre and the Le Grand Hameau expansion.

The design provides both efficient storage and improved game play. The trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. With the top layer removed you can see the second layer of trays underneath. Note the separate trays for each type of card, goods and foods in the game. There are four taller trays and four shorter trays, to allow for the different quantity in the game of each type of token. There are two trays for the coins so that they can be placed on either side of the board in easy reach of all players.the trays can be used during the game to organise the components and make access by all players easy. Note that the goods and food token trays are sized so that they fit neatly onto the board in the respective places for these resources.The game boards and rules are placed on top of the insert trays acting as a lid. The game can be stored vertically, and transported easily as it fully fills the game box.

This product consists of a flat-pack of 6 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

Note: insert designed for games with external box dimensions of 29.8 x 29.8 x 7 cm

This insert is designed to be compatible with Living Card Game style games, such as Warhammer Invasion, Ashes Rise of the Phoenixborn, Android Netrunner, Star Wars, The Lord of the Rings: The Card Game and many others. The design provides both efficient storage and improved game play. The token trays can be utilised during the game, and all trays greatly aid set-up and clear-away times.

The insert is intended for games with a box size of 29.8 x 29.8 x 7 cm (the larger standard for LCG games). There is space for all cards to be sleeved.

Insert features:
* Two large vertical card storage trays
* Two small vertical card storage trays
* Four token trays
* Two small filler trays

Note: the card trays are bottom-less and are not intended to be removed from the game box.

This insert can be used in one of two ways - either using both small card trays together with just two token trays, or using all four token trays and just one small card tray. The product has sufficient components for both variants.

This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

This Campaign 2 insert is designed to be compatible with the new smaller standard of Living Card Games with boxes sized 25.4 x 25.4 x 5.1 cm. Such games include Arkham Horror: The Card Game, A Game of Thrones: The Card Game (2nd Edition), Legend of the Five Rings: The Card Game, and Android: Netrunner The Card Game The Revised Core Set, as well as with Blood Bowl Team Manager. Please check the detailed product pages for each of these games.

The insert is designed to fit snugly inside the box, and is 2.5 cm higher than the box base to allow for maximum storage of cards. There is space for all cards to be sleeved with quality sleeves. Here you can see the box loaded with roughly half its total capacity of cards.

The insert comes with eight token trays, four wide and four narrow. They can be combined in different ways for different games to either maximise card storage or token types, or a balance between the two extremes. They are removable and usable during game play to keep the table tidy and speed up setup and clear-away times.

With the rules on top of the insert and the lid placed on top the lid rises 2.5 cm higher than the base. This still allows plenty of friction and hold to maintain its position, and the game can be safely stored vertically.

This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

Note: insert designed for game with external box dimensions of 35.9 x 28.3 x 7.3 cm

This Campaign 2 insert is designed to be compatible with Lords of Waterdeep, and Scoundrels of Skullport expansion. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. The card trays are removable and can be used during game play. There is space for all cards from the original game and the expansion to be sleeved in quality sleeves. The building trays have slots in the side to ease access, and can also be used during the game to keep the tiles tidy.

The insert has two vertical trays for cards. These are for the Lord cards, and again all can be sleeved. these two trays are higher than the other ones and keep the game board snugly in place in the box.

There are two trays for storing the four types of adventurer cubes.

There are also two trays for storing the skulls and other tokens.

There are six trays for each player pieces. Two more similarly sized trays are for storing the coins and gem tiles.

The trays are all made to be used during game play. They can be removed from the box and placed directly on or around the game board.

The game boards and rule books all fit neatly in the recess left on top of the two tray layers. With the box lid on flush with the bottom, the game can be easily transported and stored vertically without a problem.

This product consists of a flat-pack of 6 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

This Campaign 3 insert is designed to be compatible with Mansions of Madness 2nd Edition, and Beyond the Threshold, Streets of Arkham, Sanctum of Twilight, and Horrific Journeys expansions.

The design provides both efficient storage and improved game play. The trays can be utilised during the game, and they greatly aid set-up and clear-away times. The insert is arranged in three layers with the room tiles stacked in the top right corner. There is a vertical small card tray for the common item, unique item, spell, and condition decks. There is a separate tray for the damage and horror cards. All the card trays provide for sleeved cards. The other trays shown here are for the person tokens, dice, search/interact, explore/sight, and other tokens from the expansions. Miniatures are stored separately from their bases, and grouped by type. The large and medium monster trays have no base and are meant to be left in the game box. There are then trays for the investigators and the small monsters. The small and medium monster bases are stored in the large tray shown, which also has a slot for the medium and large monster tokens. The other tray here is for the investigator cards and the room doors and barricade tokens. This last tray also has slots for the ID tokens and the pink clue tokens from Beyond the Threshold .The larger room tile and rules are placed on top of the insert trays acting as a lid. The game can be stored vertically, and transported easily as it fully fills the game box.

This product consists of a flat-pack of 8 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

Note: insert designed for game with external box dimensions of 28.6 x 28.6 x 7.6 cm

This Campaign 2 insert is designed to be compatible with Mysterium®, and the Hidden Signs and Secrets & Lies expansions. There is space also for any promo cards you might have. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays.

The card decks are all removable from the box, and have space for all cards to be sleeved with quality sleeves.

There are two trays for the psychic's sleeves and the other irregularly shaped pieces. The other two trays are for the player pieces, with separate slots for each colour.

These are the remaining card trays which form part of the bottom layer of the insert.

The rules, board and other tiles go on top of the trays. First go the clairvoyance track and epilogue progress board, together with the clock. The clock face needs to be placed face-down so that the dial fits into the top of the card tray below.

Next go the rules from the main game and the expansions.

Last goes the game screen with the other four progress boards go in a stack next to the screen.

This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

Note: insert designed for game with external box dimensions of 29.7 x 29.7 x 7.3 cm

This Campaign 2 insert is designed to be compatible with Near and Far, and the Amber Mines expansion. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules, books, and boards act as a lid on top of the trays.

There are trays for the player pieces, the character standees and sheets. There are two trays for coins, meaning they can be spread around the table making access easier. The coin trays are sufficiently large for the metal coins should you have them. Each player has their own tray for their colour.

These are the four resource trays, with separate slots for each kind of token and the dice and stands.

These are the trays for the small cards. There is space again for all cards to be sleeved with quality sleeves. The trays allow for the Amber Mines® expansion small cards.

The game boards, rules and storybook fit in a recess on top of the lower trays. The rulebook goes first, which provides space for the ring binder on the storybook to go next. The storybook is followed by the game board and player boards, and then by the Amber Mines rulebook and the board overlays.

Last goes the game atlas, which fills the top of the box, acting as a lid on all the trays below. There is a gap next to the rules underneath that allows the ring binder to not impact on the box lid when closed. The game can be stored vertically, and transported safely provided the lid is kept in place.

This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

Note: This product is intended for a box size of 7.4 x 32.7 x 22.9 cm. It also works with the retail TMG version sized 6.4 x 29.8 x 22.3 cm. Also note that this is the second version of insert for Orleans.

This insert is designed to be compatible with Orleans®. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The boards and player boards act as a lid on top of the trays. The insert is arranged in two layers. There is a space at the end of the box for the player bags and scorepad.

Insert features:
* One player pieces tray
* One character tiles tray
* One building tiles tray
* One event tiles tray
* Two trays for coins and trading station tiles

While the insert does not have trays for the Trade & Intrigue expansion, to make the insert more flexible the slots at the bottom of the large trays can be used to store the extra event tiles. You can then place the cards and building tiles with the player bags.The insert also works well with the TMG version of the game. The tray arrangement is slightly different to fit the smaller box.When used with this version the lower box height means the lid rises 5 mm when closed.

This product consists of a flat-pack of 3 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

This Campaign 3 insert is designed to be compatible with Pulsar 2849.

The design provides both efficient storage and improved game play. The trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. With the top layer removed you can see the second layer of trays underneath. The insert includes separate trays for each of the colour player pieces, with separate slots for the card and plastic components. The other trays are for the gyrodyne tiles, and the engineering cubes, four-cube tokens and other tokens. When packing the game into the box with the insert, the HQ boards and goal tiles go as shown here, on top of the trays below, in a recess made for them. The game board is then placed on top. This is kept in place by the square filler tray in the top left corner. Note that while some trays can be seen below the board, these are for the large transmitter tiles, which cannot come out with the board positioned in this way. On top of the board go the rules, and then the remaining curved boards as shown. With all the components placed in the box as shown and the lid kept on, the box can be stored vertically.

This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

Note: insert designed for game with external box dimensions of 32.3 x 32.3 x 9.5 cm

This Campaign 2 insert is designed to be compatible with Rising Sun Daimyo Box, and has space for the Dynasty Invasion, Kami Unbound, and Monster Pack expansions.. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times.

Note: while this insert does allow for vertical storage, the game contains many miniatures with protruding weapons that are liable to bend. We recommend therefore to store the game horizontally. The two largest monsters, the Daikaiju and Earth Dragon, don't have their own trays, but have slots between other trays. Note also the Kami cards stored vertically down the side of the monster trays. The trays have gaps next to the tray wall to allow the miniatures' bases to slot into them. This prevents the white and black based minis from moving. The fourth tray is for the smaller monsters from the Daimyo box, and the smaller lucky gods miniatures from the Dynasty Invasion expansion. There are three trays are for storing the monster bases. There is a tray for the season cards, with space for all cards to be sleeved. The last tray at the top is for the hexagon clan markers, and the three clans' plastic strongholds.

This product consists of a flat-pack of 8 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

Note: insert designed for game with external box dimensions of 32.3 x 32.3 x 12 cm

This Campaign 2 insert is designed to be compatible with Rising Sun, both the retail and the Kickstarter editions. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays.

Note: while this insert does provide for vertical storage, the game contains many miniatures with protruding weapons that are liable to bend. We recommend for this reason to store the game horizontally.

The board, clan screens and rules are stored underneath the clan trays. This gives a flat surface for them to rest on, as well as a lid on the trays below.

There are two special trays for the turtle clan strongholds.

There are two trays for vertical storage of the season cards. There is room for all cards to be sleeved with quality sleeves

There are two trays for the large monsters. These trays also have gaps for the bases to prevent the miniatures from moving around in the tray.

This product consists of a flat-pack of 9 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

This Campaign 3 insert is designed to be compatible with Robinson Crusoe and the Voyage of the Beagle Vol. 1 expansion.

The design provides both efficient storage and improved game play. The trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. The insert is arranged in two layers as shown. Note that the island hexagon tiles and first player token are stored in between the other trays. There are four trays for storing large cards vertically down the sides of the box. There are two more card trays for the remaining large cards ,and two separate trays for the small cards.

There are three trays form the corner of the insert for storing the wound tokens, the small Voyage of the Beagle tokens, and the additional tokens from the game. There are two large trays, one for the large Voyage of the Beagle tiles and one for the discovery and adventure tokens.

This game boards need to be placed in the box in the following sequence. First go the boards and rule book from the Voyage of the Beagle expansion. Then goes the main game board, followed by the first three character sheets. The last character sheet and the scenario sheets go next, with the rulebook going on top of everything to fill the box. The insert design works equally well with the Pegasus Spiele edition of the game which is in a similar box sized 29.4 x 29.4 x 7.2 cm.

This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.