Foam tray with 36 cut-outs (22,5 mm x 22,5 mm) for Dice Master.

The Feldherr half-size (HS) foam tray has the dimensions: 275 mm x 172 mm x 25 mm height. The 25 mm depth of the foam is result from 10 mm foam base and slot foam tray with 15 mm effective depth

Foam tray with 36 cut-outs (22,5 mm x 22,5 mm).

The Feldherr half-size (HS) foam tray has the dimensions: 275 mm x 172 mm x 25 mm height. The 25 mm depth of the foam is result from 10 mm foam base and slot foam tray with 15 mm effective depth

Individual protection for all 18 Gloomhaven miniatures. Each figure has its own individually shaped compartment.

The Feldherr half-size (HS) foam tray has the dimensions: 275 mm x 172 mm x 35 mm height. The 35 mm depth of the foam results from 10 mm foam base and slot foam tray with 25 mm effective depth

- Fine pored quality foam Made in Germany
- chlorine and acid-free
- Made in Germany

Don't want to deal with stained or damaged Investigator tokens anymore? With the Feldherr Character Standees, your Investigator tokens will retain their good looks.

- The Character Standees are compatible with the cardboard Investigator tokens for Arkham Horror 3rd Edition and Eldritch Horror. They replace the original bases.
- Unlike the original bases, the Investigator tokens do not have to be jammed into the Standees. This prevents damage to the token.
- Also wear and tear and ugly kinks due to constant touching of the tokens are prevented, since the tokens are not touched directly while playing with the Standees.
- "Ready to Use" - no assembly required

The Character Standee has the following dimensions: approx. 37 mm long x 20 mm wide x approx. 48 mm height

As with all 3D-printed models, minor imperfections may occur. The product images are only examples of how the finished product may look. Colors may vary.

- thermosoftening plastic
- 3D printed in Germany

The set contains four player boards.

Investigator sheet, Reference and Condition cards, Health and Sanity tokens, ... With this two-part Feldherr player board for Eldritch Horror you have all the cards and tokens that your investigator needs, always in view and immediately at hand. This saves valuable playtime and the game is even more fun.

The cards also fit into the slots with protective sleeves.

This game aid consists of two parts, which can be easily joined together for the game and stowed away in two pieces afterwards to save space.

- When assembled the player board has the following dimensions: 260 / 185 mm long x 145 mm wide x 10 mm high

- thermosoftening plastic
- 3D printed in Germany

As with all 3D-printed models, minor imperfections may occur. The product images are only examples of how the finished product may look. Colors may vary.

This foam inlay was especially designed for the foam tray of the 'Arkham Horror' board game box and is divided into 12 compartments.

Here you can sort the Investigator Status Tokens, the Terror Marker, the Doom Tokens and Activity Markers, as well as the Explored and Closed Markers into the individual compartments. Two compartments are reserved for the Plastic Investigator Stands.

The 12 compartments of the foam inlay have the following dimensions:

- 9 compartments: 30 mm long x 42 mm wide x 40 mm deep
- 3 compartments: 51 mm long x 42 mm wide x 40 mm deep

- The foam inlay has the dimensions: 181 mm x 158 mm x 40 mm.

- high-quality, fine pored foam
- CFC-free
- chlorine and acid-free
- Made in Germany

Everything is at your control thanks to the Feldherr Player Dashboards. With them, you can keep order on the tabletop.

- The set contains 5 pieces Feldherr Player Dashboards for Mansion of Madness Second Edition
- The plastic dashboards simplify character management and provide a well-organized overview on the gaming table.
- Full control over your characters. You decide which cards you want to use with the dashboards.
- 36 card slots per Dashboard provide space for Horror cards, Damage cards, Spell cards, Condition cards, Common Item cards, and Unique Item cards.
- Of course, the cards will also fit in the slots with protective sleeves.
- 2 large compartments for Investigator Card and Clue Tokens
- "Ready to Use" - no assembly required

The 38 compartments of the dashboard have the following dimensions:

- 18 compartments: 46 mm long x 2 mm wide x 7 mm deep
- 18 compartments: 39 mm long x 2 mm wide x 7 mm deep
- 1 compartment: 125 mm long x 74 mm wide x 5 mm deep
- 1 compartment: 74 mm long x 46 mm wide x 5 mm deep

The Dashboard has the dimensions: 173 mm x 111 mm x approx 7 mm / 28 mm height

- thermosoftening plastic
- 3D printed in Germany

As with all 3D-printed models, minor imperfections may occur. The product images are only examples of how the finished product may look. Colors may vary. All products are delivered unpainted.

This foam tray is a perfect solution for the miniatures of Warhammer Shadespire. In the 10 slots of the Half-Size mat you can stow and protect your Stormcast Eternal as well as your Khorne Bloodhound faction. The additional three cut-outs can be used for further figures or game material.

The Feldherr half-size (HS) foam tray has the dimensions: 275 mm x 172 mm x 50 mm height. The 50 mm depth of the foam is result from 10 mm foam base and slot foam tray with 40 mm effective depth.

10 compartments for miniatures

4 compartments: 64 mm x 44 mm x 40 mm
4 compartments: 60 mm x 44 mm x 40 mm
1 compartment: 75 mm x 40 mm x 40 mm
1 compartment: 50 mm x 40 mm x 40 mm

This foam tray protects ten of your Warhammer 40,000 & 30,000 figures. Through the ten specially designed cut-outs your Warhammer figures are protected from dust and scratches and easy to transport, too..

The Feldherr half-size (HS) foam tray has the dimensions: 275 mm x 172 mm x 50 mm height. The 50 mm depth of the foam is result from 10 mm foam base and slot foam tray with 40 mm effective depth.



10 compartments for figures

4 compartments: 64 mm x 44 mm x 40 mm
4 compartments: 60 mm x 44 mm x 40 mm
1 compartment: 75 mm x 40 mm x 40 mm
1 compartment: 50 mm x 40 mm x 40 mm

Feldherr foam tray suitable as an insert for the original "Mansions of Madness: Sanctum of Twilight" board game box. The tray provides a great solution for protecting all figures, tokens and cards in sleeves from the original board game box. There is an additional 10 mm foam topper to protect the figures.

The foam tray has the dimensions: 247 mm x 247 mm x 50 mm and is custom made to suit the Mansions of Madness – Sanctum of Twilight game box.

Included in delivery:

- 1 x 50 mm foam tray for the entire Mansions of Madness – Sanctum of Twilight miniatures, tokens and cards in sleeves (item no. AS050VD05)
- 1 x 10 mm extra topper (item no. ASBA010)

The 50 mm foam tray for Mansions of Madness – Sanctum of Twilight can hold:

- game board tiles
- 4 Monsters
- 2 Heroes
- crads in sleeves and tokens

- Dimension: 247 mm x 247 mm x 50 mm height, effective depth: 40 mm
- Made in Germany
- high-quality, fine pored foam
- Fine pored quality foam Made in Germany
- chlorine and acid free

For safe storage of miniatures and game material - Well suitable for bulky 28 mm scale miniatures on bases up to 40 mm.

10 compartments in three different sizes for safe storage of miniatures and game material

This foam tray has been especially designed for the 'Arkham Horror' board game box. It is divided into 8 tailor-made compartments to clearly store all game components.

One large compartment is provided for the additional inlay, which is used to sort the smaller tokens, markers and plastic stands. The Investigator Sheets are also placed here.

There are a total of 3 compartments available for the game cards. The finger-wide recess makes it easy for you to remove the cards. 2 compartments offer space for the Ancient One Cards and one is reserved for the smaller Investigator Cards. The cards also fit in here with sleeves.

The Investigator and Monster Markers, as well as the Gate Markers and the First Player Marker, can be sorted into custom-cut compartments. A small rectangular compartment accomodates the dice.

- The foam tray has the dimensions: 285 mm x 285 mm x 60 mm total height (50 mm usable height + 10 mm foam base)

- high-quality, fine pored foam
- CFC-free
- chlorine and acid-free
- Made in Germany

Compatible with Arkham Horror 3. Edition and its expansion Dead of Night

- 15 removable trays
- Lid closes flush
- Can be stored vertically
- Supports premium card sleeves
(max ext. size 94 x 61 mm and 68 x 45 mm)
- Dimensions after assembly: 286 x 286 x 67 mm
- Assembly requires wood glue

Hobby gaming product. Age 14+. Not a children's toy.
Warning: Choking hazard, not suitable for children under 3 years.

You want to pit yourselves against the incomprehensible eminence of cosmic horror with some handguns and amateur spells? You must be insane! Luckily for you, you can now gain the support of a very special artefact: our organizer with custom storage for all components makes sure the crawling chaos doesn't start in your game box.

ARKH consists of 15 trays which can all be removed from the box.

Trays 1-2: Card holders for the event cards - one for storage and one as dispenser for the table (replaces the included event deck holder)

Tray 3: Card holder for the archive cards

Trays 4-5: Card holders for the headline cards - one for storage and one as dispenser for the table (for the 13 card headline deck). In the box this holds the dice.

Trays 6-7: Card holders for the anomaly cards - one for storage and one as dispenser for the table (for the current anomaly deck)

Trays 8-10: Three identical card holders for the encounter decks, lying flat for optimal access and easily adding event cards

Tray 11: Card holder for all small cards, sorted by type

Tray 12: Holds the street tiles, investigator tokens and their plastic stands

Tray 13: Holds the focus tokens (by type) and the clue/doom tokens

Tray 14: Holds damage, horror, mythos and remnant tokens

Tray 15: Holds anomaly, activation, marker and money tokens

When putting away the game the map tiles (the neighborhoods) are put into the box first, then the 15 trays are stacked around them, so they exactly fill the available space. The scenario and investigator sheets go into a recess on top, finally followed by the rulebooks. The lid closes flush and all components stay in their place, even when the box is stored vertically.

Please note: There is no designated space for the cardboard event deck holder, but it is being replaced by a wooden one. For the cardboard monster deck holder (from the expansion) there is also no room and also no replacement. But disassembled it can be stored on top with the rulebooks.

This article is delivered as a kit that requires assembly. We recommend the use of wood glue (not included).

Compatible with Mansions of Madness (2nd Edition) as well as all compatible game components of the 1st edition base game

- 14 removable trays
- Raises lid by 5 mm
- Can be stored vertically
- Supports premium card sleeves
(max ext. size 45 x 67 mm)
- Dimensions after assembly: 286 x 286 x 132 mm
- Assembly requires wood glue

This insert/organizer is a non-licensed product. All trademarks and copyrights are properties of their respective owners.

Hobby gaming product. Age 14+. Not a children's toy.
Warning: Choking hazard, not suitable for children under 3 years.

Brave investigators enter a mysterious mansion. It hides not only a secret, but a dark menace from beyond reality. The investigators use clues, helpful items and even magic spells to best locks, puzzles, monsters and their own paranoia. Our insert holds all components in a very sane way and creates some order in the manor house.

VILL consists of 14 trays which can be removed from the box and freely arranged on the table.

Tray 1: This is for all cards, sorted by decks. The conditions go into their spaces in pairs.

Tray 2: Eight compartments for tokens and dice.

Tray 3: A flat tray for the investigator cards.

Trays 4-5: These two trays fit on top of each other and offer room for all 16 investigators of the 1st and 2nd editions.

Trays 6-13: These are 8 trays in total, that can be combined into 4 and are the home for most monster figures.

Tray 14: Storage and placeholder at once - this fits the riot monsters, but also protects the figures beneath and supports the card tray on top.

The map tiles are stored in two neat stacks which fit exactly in between the trays. If you do not own the 1st edition, use the included placeholder to still secure everything in place.

Once all trays and map tiles are back in the box, the rulebooks go on top. The lid will be raised by 5 mm. The game can be stored vertically.

This article is delivered as a kit that requires assembly. We recommend the use of wood glue (not included).

Compatible with Scythe & its expansion Invaders From Afar

Accomodates Kickstarter version incl. promo cards, extra power dials, metal coins and realistic resources

- 15 removable trays
- 2nd game board (sold separately) raises lid by 5 mm
- Can be stored vertically
- Supports premium card sleeves
(max ext. size 73 x 118 mm & 60 x 98 mm & 55 x 73 mm)
- Dimensions after assembly: 353 x 288 x 94 mm
- Assembly requires wood glue

This insert/organizer is a non-licensed product. All trademarks and copyrights are properties of their respective owners.

Hobby gaming product. Age 14+. Not a children's toy.
Warning: Choking hazard, not suitable for children under 3 years.

To lead one's own faction to dominance in Eastern Europa, busy workers, food, building material, funds and giant mechs are needed! Our insert groups and sorts all these components and creates steady supply lines. It also fits into the Scythe Legendary Box and will link with a future product of ours for the 2nd and 3rd expansion of the game.

SCYT consists of 16 trays, of which 15 can be removed from the box and freely arranged on the table.

Trays 1-7: One per player with the wooden tokens, mechs and leader of their faction.

Tray 8: Holds the cards that are only needed for game setup. This tray stays in the box.

Tray 9: For the combat cards. Can be placed directly on the board.

Tray 10: For the encounter cards. Can be placed directly on the board.

Tray 11: For the objective cards. Can be placed directly on the board.

Tray 12: Holds all mats.

Tray 13: Seven compartments for coins.

Tray 14: Dispenser for the four resource types.

Tray 15: Power dials.

Tray 16: Encounter tokens.

Once all trays are back in the box, the game board(s) and manuals go on top. With the standard game board the lid closes flush. With the additional game board expansion the lid is raised by 5 mm. The game can be stored vertically.

This article is delivered as a kit that requires assembly. We recommend the use of wood glue (not included).

Since 2016, the lovecrafted horror of the Second Edition is already spreading on your tabletop. Meanwhile, seven more expansions are piling up on your shelf next to the core game. And because the horror looks even better in color, you have started painting the miniatures.

Clearly, it's time to tidy up! We would be happy to help you with that. With this Feldherr bundle, you have all the figures and accessories from the basic game of the 2nd Edition to the "Path of the Serpent" expansion safely and neatly stowed away.

The bundle consists of:

Five foam sets as inserts for the following board game boxes:

- "Mansions of Madness Second Edition" - Core Set (AF05Set)
- "Horrific Journeys" expansion (AF27Set)
- "Beyond the Threshold" expansion (AS050VD05)
- "Streets of Arkham" expansion (AF09Set)
- "Path of the Serpent" expansion (AF55Set)

As well as a Feldherr Storage Box LBBG250 incl. foam inserts (LBBG09) for the miniatures and game material from the following boxes:

- "Recurring Nightmares" Figure and Tile Collection
- "Suppressed Memories" Figure and Tile Collection
- "Sanctum of Twilight" expansion

This gives you everything you need to store your collection properly. The five foam sets will help you to sort the miniatures and the game material in the original board game boxes.

For the other three expansions, the foam-filled storage box LBBG250 offers you a compact solution for storage and transport.

From the Shoggothe to the Chtonians to the Hounds of Tindalos and the investigators - every figure (including Base) gets a suitable compartment. Thanks to the custom-fit cut, it is ensured that the miniatures stay in place during transport. Nothing slips around and no figure has to share a compartment with another.

With this not only the sensitive details like tentacles or wings are protected from damage. The colors of painted miniatures are also absolutely safe from scratches, abrasion and details flaking off.

In addition to the protection of the models, organization is also taken care of. All game materials are clearly arranged in the boxes. This saves time and nerves when setting up the game and no tokens or dice get lost.

For the final all-round protection, each box is of course also supplied with a matching foam topper.

The Feldherr Storage Box LBBG250 consists of coated, double-walled cardboard in a discreet Feldherr design. Due to the light material and the carrying handle, it is perfectly suited for the clear storage and easy transport of your "Mansions of Madness" collection.

Dimensions of the Storage Box LBBG250:

- Inside: 300 mm x 300 mm x 250 mm
- Outside: 320 mm x 320 mm x 260 mm

- high-quality, fine pored foam - Made in Germany
- chlorine and acid-free

Don't want to deal with stained or damaged Investigator tokens anymore? With the Feldherr Character Standee, your Investigator tokens will retain their good looks.

- The Character Standee is compatible with the Investigator tokens from Arkham Horror 3rd Edition and Eldritch Horror and replaces the original bases.
- Unlike the original base, the Investigator tokens do not have to be jammed into the base. This prevents damage to the token.
- Also wear and tear due to constant touching of the tokens is prevented, since the tokens are not touched directly while playing with the Standees
- "Ready to Use" - no assembly required

The Character Standee has the following dimensions: approx. 37 mm long x 20 mm wide x approx. 48 mm height

As with all 3D-printed models, minor imperfections may occur. The product images are only examples of how the finished product may look. Colors may vary.

- thermosoftening plastic
- 3D printed in Germany

This custom foam insert for the Gloomhaven game box has 12 compartments for game material of the popular Cephalofair board game.

The tray provides the following compartments:

- 1 custom compartment for Monster Stat Sleeves
- 1 custom compartment for HP/XP-Dials
- 7 compartments for (sleeved) small and large cards
- 1 long compartment for e. g. Sealed Envelopes
- 1 compartment for small game material, e. g. Plastic Stands
- 1 compartment for small game material, e. g. Standees

The tray fits exactly into the original game box. Next to the tray, there is still space left to store the character tuck boxes.

The foam tray has the following dimensions: 285 mm x 275 mm x 80 mm total height (70 mm usable height + 10 mm foam base).

- fine pored foam – Made in Germany
- chlorine free and acid free
- CFC-free

This foam insert has 38 compartments which allow you to store small game material like tokens, discs and map tiles in the original Gloomhaven game box. The insert fits exactly into the game box - next to the insert there is still enough space to store the Character Tuck Boxes

The insert has the dimension: 285 mm x 275 mm x 35 mm total height (25 mm usable height + 10 mm foam base)

- ready to use: no assembling necessary
- fine pored foam, Made in Germany
- chlorine free and acid-free
- CFC-free

This foam insert has 36 compartments which allow you to organize and store small Gloomhaven game material like tokens, discs and standees.

The insert fits exactly into the original game box. Next to the insert in the box, there is still enough space for the storage of the Character Tuck Boxes.

The insert has the following dimension: 285 mm x 275 mm x 35 mm total height (25 mm usable height + 10 mm foam base).

- ready to use – no assembling necessary
- fine pored foam, Made in Germany
- chlorine free and acid free
- CFC-free

Complete set with 64compartments for all figures, cards in sleeves, tokens and map tiles from the original Masmorra: Dungeons of Arcadia - Core Box and the Kickstarter - Dungeoneer! Pledge exclusives. The set fits: the 22 monster dice, cards in sleeves, small and medium dungeon tiles, the 19 heroes and all tokens. The foam trays fits perfectly into the original board game box, or into the Feldherr box LBBG. In addition, the set also offers free compartments for some heros, e.g. for Luke the Lucky and the 5 heroes from the Adventurers Set.

Foam extends over the edge of the board game box.

The set contains three trays:

1 x AGHS035BO 35 mm foam tray with 33 compartments for Masmorra: Dungeons of Arcadia - dice and dungeon tiles
1 x AGHR050BO 50 mm foam tray with 10 compartments for Masmorra: Dungeons of Arcadia - heroes and cards
1 x AGHT050BO 50 mm foam tray with 21 compartments for Masmorra: Dungeons of Arcadia - Kickstarter exclusives
1 x Topper

The 35 mm tray offers 33 compartments.

6 compartments for small dungeon tiles
27 compartments for dice

The 50 mm tray offers 10 compartments.

The 50 mm tray offers 21 compartments.

CFC-free; according to Oeko-Tex ® Standard 100 / Class I - items for babies and toddlers
chlorine and acid free
Made in Germany

This set will be the new home for e.g. Phoenix, Allister, Erza, Lucy, Kings Man, Watcher, Gold Smoke King, White Lion, Butcher and many others!
Fits the original Kingdom Death Monster 1.5 core game box: Value-Set for Kingdom Death Monsters (KDM) 1.5 miniatures. All miniatures of the Wave 1 find well protected place in this set. Three foam trays are universally crafted for Kingdom Death, allowing also some of the miniatures from future epansions (Wave 2 / Wave 3 and Wave 4) will be included. Appr. 40 compartements can be used for further expansions! In total, you can stow 92 miniatures and the giant Phoenix in the original board game box.

Overall, the foam set has a dimension of 610 mm x 310 mm x 170 mm height. We assume that our foam set lies on the original plastic sorting insert and the game tiles and rules are also transported in the box. If so, it is about 12 cm above the edge of the lower carton.


The Value Set contains:
1 two-part foam tray for the giant Phoenix 310 mm x 210 mm x 160 mm height (additional 3 compartments in the base)
1 foam tray for 36 small Kingdom Death Monster miniatures 400 mm x 310 mm x 40 mm height
1 foam tray for 31 midsized Kingdom Death Monster miniatures 400 mm x 310 mm x 50 mm height
1 foam tray for 22 large Kingdom Death Monster miniatures 400 mm x 310 mm x 60 mm height
2 foam topper
Informations about Phoenix foam tray:
Since the Phoenix is quite large, we have made a two-piece foam tray.
Among other things, we took into account that the Phoenix can be variably positioned on the base.
In order to make reasonable use of the space in the lower part, it also has room for some large models.
The upper part of the Foam Foam Tray lies on the lower part and protects the Phoenix sideways and from above.

Informations about foam tray for 36 small Kingdom Death Monster miniatures:
36 compartments 40 mm x 54 mm x 30 mm

Informations about foam tray for 31 midsize Kingdom Death Monster miniatures:
10 compartments 70 mm x 50 mm x 40 mm
8 compartments 70 mm x 35 mm x 40 mm
6 compartments 70 mm x 30 mm x 40 mm
4 compartments 60 mm x 35 mm x 40 mm
3 compartments 60 mm x 30 mm x 40 mm

Informations about foam tray for 22 large Kingdom Death Monster miniatures:
6 compartments 50 mm x 30 mm x 50 mm
4 compartments 65 mm x 50 mm x 50 mm
4 compartments 75 mm x 50 mm x 50 mm
4 compartments 75 mm x 65 mm x 50 mm
2 compartments 85 mm x 70 mm x 50 mm
2 compartments 85 mm x 55 mm x 50 mm

Gloomhaven is truly an epic game. And that doesn't just refer to the campaigns. With about 10 kilos of game material, it is easy to lose track.

How good that this set, thanks to lightweight inserts made of foam and the card holders made of plastic, creates order without making the whole thing even unnecessarily heavy.

A real simplification, then. You always keep the overview, are immediately ready to play and can save your energy for the really important tasks.

- This Feldherr Organizer set fits neatly into the original Gloomhaven board game box.
- It holds all the game materials from the core game and is compatible with the first, second, third, and fourth editions.
- Two foam inserts help you sort tokens and other small-sized game materials.
- Individually removable plastic card holders are reserved for the cards, sheets, and counting discs.
- All cards also fit with protective sleeves. Compatible with premium card sleeves.
- The Character Tuck Boxes are stored next to the foam inserts (see photos).
- Larger game components, such as the Map Tiles, Rulebook, and Scenario Book, are placed upon of the foam topper.
- The lid of the board game box protrudes about 1 cm.
- transportable and tilt-resistant - vertical storage possible
- ready to use - no assembly required

The set consists of:

- 1 plastic card holder for small game cards (e.g. Monster Ability Cards, Attack Modifier Cards)
- 1 plastic card holder for large game cards (e.g. Event Cards) and Dials
- 1 plastic tray for Monster Stat Sheets and Sleeves
- 1 plastic tray for remaining game material (e.g. Standees, Overlay Tiles)
- 1 foam insert with 36 compartments for tokens (CEMEGW035BO)
- 1 foam insert with 38 compartments for tokens (CEMEGX035BO)
- 1 foam topper

- The foam trays have the dimensions: 285 mm x 275 mm x 35 mm total height (25 mm usable height + 10 mm foam base)

- high-quality, fine pored foam
- chlorine and acid-free
- Made in Germany

As with all 3D-printed models, minor imperfections may occur. The product images are only examples of how the finished product may look. Colors may vary. All products are delivered unpainted.

- thermosoftening plastic
- ready to use - no assembly required
- 3D printed in Germany